A final year project on “Remote Patient Monitoring System Through IOT Using Mobile Application” submitted by Matta Jagadish to extrudesign.com. This project was completed by 1Matta Jagadish, 2Shaik Mohammad Fahanus, 3T. Sunil Kumar (Electronics and Communication Engineering) from Hindustan institute of technology and science, Padur, Tamilnadu, India. ABSTRACT Health-related issues and parameters are of utmost […]
A case study on AirAsia: Impact of service strategy towards consumer satisfaction in the low-cost carrier industry in Kuala Lumpur, Malaysia
A final year project on “Impact of service strategy towards consumer satisfaction in the low-cost carrier industry in Kuala Lumpur, Malaysia″ submitted by Ibrahima Balde to extrudesign.com. CHAPTER 1 1.1 RESEARCH PROPOSAL TITLE: A STUDY OF THE IMPACT OF SERVICE STRATEGY TOWARDS CUSTOMER SATISFACTION IN THE LOW-COST CARRIER INDUSTRY IN KUALA LUMPUR, MALAYSIA: A CASE OF […]
Corrosion Fatigue Analysis of Medium Carbon Steel C45
A final year project on “Corrosion Fatigue Analysis of Medium Carbon Steel C45″ to review whether the corrosive action affects the fatigue life of the material. This project paper is submitted by KESAVA SRIRAM to extrudesign.com. ABSTRACT Corrosion fatigue testing was carried out on medium carbon steel C45. To review whether the corrosive action affects […]
An Article on “Future Robots” by Boston Dynamics
This Article on “Future Robots” by Boston Dynamics is Written by me (Sundar Dannana), during my academics (IIIrd B.Tech-2015) out of interest in robotics, I am graduated from VITAM College of Engineering, Vishakapatnam. All the material source is taken from www.bostondynamics.com any mistake or misleading of information in this article is not our intention. Please […]
