What is a Rivet? Well, A Rivet is a permanent fastening element mostly used for fastening light metals of plates in Boiler shells, structural works, Shipbuilding, and bridges. In this article, we are going to discuss different types of Rivet Heads according to the Indian Standards. In a permanent joint, Rivet is the fastening element. […]
Archives for September 2021
Methods of Riveting and Material used for Rivets
What is a Rivet? Well, A Rivet is a permanent fastening element mostly used for fastening light metals of plates in Boiler shells, structural works, Shipbuilding, and bridges. In this article, we are going to discuss the methods of Riveting joints and what are the materials that can be used for the Rivets. In a […]
How to design an Oval Flanged Pipe Joint?
The Oval flanged Pipe Joints are mostly used in small pipes with diameters up to 175mm. This Oval Flanged Pipe Joint is mostly used in Hydraulic applications. In the previous article, we have discussed the Circular Flanged Pipe joint. To design an Oval Flanged Pipe Joint we need to determine the main parameters such as […]
How to design a Circular Flanged Pipe Joint?
The circular flange pipe joint is one of the most used flange joints among the other types of flanged joints. To design such a circular flanged joint we have to determine the main influencing factors and evaluate them. In this article, we will determine the main parameters to design a circular flanged joint for a […]
What Pipe Flange should I use based on Steam pressure according to Indian Boiler Regulation?
Is there any regulation that standardized the pipe diameter and thickness for the steam pressure? Yes, there is a regulation in India called the Indian Boiler Regulation, in short IBR which is created on 15th September 1950 to regularise the manufacturing of boilers, steam generators, and steam distribution piping systems. For the manufacturers and the […]
Impact of Crude oil export on Economic Growth of Nigeria
A Final Project on “Impact of Crude oil export on Economic Growth of Nigeria” was submitted by Olawale Mudashiru (from the University of Jos, Plateau State) to extrudesign.com. 1. INTRODUCTION 1.1 BACKGROUND OF THE STUDY Nigeria economy is basically an open economy with international transactions constituting an important proportion of her aggregate economic activities. Over the years, […]
What are different Pipe Joints?
In transporting fluids such as water, steam, gases, oil, and chemicals, pipes are used. Designing a pipe with basic parameters such as the diameter and thickness of the pipe is explained in the previous article. While designing these pipes the length can be limited, there must be a way to join them to achieve suitable […]
Smart Waste Management System Based On A IoT Platform
A Final Project on “Smart Waste Management System Based On A IoT Platform” was submitted by Nikhil S Ambigar (from the Indian Institute of Information Technology,(IIIT) Dharwad, India) to extrudesign.com. Abstract Many metropolitan cities produce tons of waste every day, so efficient methods for collection and disposal are crucial. To make people’s lives happier, safer, and […]
Communication of Safety in Factories
A Final Project on “Communication of Safety in Factories” was submitted by Aaryaman Maheshwari (from Manipal University(MAHE), Manipal, Karnataka 576104 INDIA) to extrudesign.com. ABSTRACT Factories are places of risky and dangerous work which involves heavy machinery, maybe chemicals, hardware etc. It definitely has a higher risk of causing injuries and damage to human lives employed. It […]
What are the different Reticles in Metrology?
First of all, What is a Reticle? A Reticle is a Graticule that turns the microscope into a measuring device in Metrology. On the eyepiece of the microscope, there are the graduated reference lines are etched to take measurements, these are the Reticles. In this article, we are going to discuss the different Reticles with […]
What is Laser Interferometer?
Interferometry is nothing but the use of optical interference to carrying out precise measurements of very small linear dimensions. Laser Interferometer is one of the interferometers which uses laser means and electronic controls to carry out the inspection of machine parts for straightness, parallelism, and flatness, and measurement of very small diameters, among others, and also […]
Comparative Study Of Individual Investors: Physical Assets Vs Financial Assets
A Final Project on “Comparative Study Of Individual Investors: Physical Assets Vs Financial Assets” was submitted by Adhavan.V (from Sri Krishna Arts and Science College, Coimbatore, INDIA 641008) to extrudesign.com. Abstract The financial position of a country largely depends on the inflation rate, foreign exchange rate, per capita Gross domestic product, etc. Savings from middle-class households […]