In the previous articles, we have discussed the 2 stroke petrol engine working principle. But now we are going to discuss the port opening and closing timings in the 2 stroke engine by drawing a Port Timing diagram. Two-stroke Engines In two-stroke engines, the Thermodynamic cycle will be completed within the one revolution of the […]
Archives for January 2019
Comparison of the Actual Cycles and the Air-standard Cycles
As we discussed the different Air-standard cycles in the previous articles, this article is a Comparison between the Actual Cycles and the Air-standard Cycles. What is the Actual cycle? The Actual cycle in the Thermodynamics is a cycle of operations experienced by the actual Internal combustion engine where the efficiency of this actual Internal combustion […]
What is the Third Law of Thermodynamics?
The third law of Thermodynamics is one of the laws from the three laws of thermodynamics. Where the first law states about the Quantity of energy. Which means the energy cannot be created nor it can be destroyed, It can be transferred from one form to another. This is the law of Law of Conservation […]
What is the Second Law of Thermodynamics?
The Second Law of Thermodynamics is one of the Thermodynamic laws from the three laws of thermodynamics. Where the first law states about the Quantity of energy. Which means the energy neither be created nor it can be destroyed. This is the Law of Conservation Energy. The second law of the thermodynamics, we are going […]
What is the Brayton cycle?
As we have already discussed the Diesel Cycle, This Brayton Cycle is the extension for the Diesel Cycle and the Gas turbines work based on this Brayton Cycle. Let’s discuss this in detail. Brayton cycle The Brayton Cycle is the Theoretical Cycle for the Gas Turbine. This cycle is a modification to the Diesel Cycle. […]
What is the Atkinson Cycle?
We have already discussed the Otto cycle in the previous article, This Atkinson Cycle is an extension cycle for the Otto cycle. Let’s discuss more on it. Atkinson Cycle In the Otto cycle, there are two Isentropic processes(Isentropic compression and the Isentropic Expansion), and two Constant volume Processes. The Isentropic Expansion of this Otto cycle […]
What is the Lenoir Cycle?
We have discussed the different air standard cycles in the previous articles, Lenoir Cycle is one of the idealized thermodynamic Air standard cycles which is used in the Pulse Jet Engines. Lenoir Cycle Lenoir Cycle consists of a constant volume heat addition, Isentropic expansion, and the constant pressure heat rejection processes. There is no compression […]
What is Dual Cycle in Thermodynamics?
Dual cycle in thermodynamics is a mixed cycle from the Otto cycle and the diesel cycle. We have already discussed these cycles with the P-V and T-S diagrams in the previous articles. In this article, we are going to discuss the Dual cycle with the P-V diagram and the T-S diagram. Dual Cycle The Otto […]
Impact of interpersonal conflict on university students’ mindset
A Final Year project on “Interpersonal conflict depends on us, but it is entirely our responsibility and the decision to better our relations among ourselves and others” is submitted by Usama Zeid Bashir Salim (from the European University of Lefke) to Extrudesign.com ABSTRACT In this research, the impact of interpersonal conflict on the higher institution […]