In the previous tutorial, we have discussed the list of Material Testing Methods, and how to conduct the Tensile test, in this tutorial we are going to discuss how to conduct the Compression test. Compression Test The Compression test is also similar to the tensile test, the way we conduct it on the UTM. It also comes under the destructive […]
Archives for August 2018
06. Apply material to model, How to read mass properties in creo?
In the previous Tutorial Guide, we have discussed how to Edit definitions, redefining feature, change the references in creo. In this tutorial Guide, we are going to discuss how to Apply the material to the model, How to read mass properties in creo. Apply the material to model, How to read mass properties in creo? In […]
05. b) Edit definitions, Redefining feature, change references in Creo
In the previous Tutorial Guide, we have practice a creo modelling exercise so that we will understand how we can use tools altogether. In this tutorial Guide, we are going to discuss how to Edit definitions, redefining feature, change the references in creo. Edit definitions, Redefining feature, change the reference in Creo In this video, we […]
05.a) Creo 3.0 Exercise session – Basic Creo modelling exercise
In the previous Tutorial Guide, we have discussed, the Hole command and the pattern feature in detail. In this tutorial Guide, we are going to practice a creo modelling exercise so that we will understand how we can use tools altogether. Creo modelling Exercise Watch This Video On youtube: https://www.youtube.com/watch?v=zV_C6NjawdQ Exercise Drawing for Creo <<Previous […]
How Tensile Test is conducted?
In the previous tutorial, we have discussed the list of Material Testing Methods, in this tutorial we are going to discuss how to conduct the tensile test. Tensile Test The tensile test comes under the destructive test where we apply the gradually increased load up to the material to get a fracture. So a tensile test is […]
What are the different Material Testing Methods? (Testing of Materials)
The components that we design and engineering should satisfy the service and the requirement. For that, engineers make sure that each type of material should be tested before we used for the making of the components. Along with the strength, there are other properties are also needs to test such as hardness, toughness, brittleness, etc. […]
Creo 3.0 Basic Part modelling- Hole wizard (Hole Command) and pattern
In the previous Tutorial Guide, we have discussed, the Sketch-based features and Shape Based Features. In this tutorial Guide, we are going to discuss the Hole wizard (Hole Command) and pattern the holes with a video Tutorial.. Hole wizard (Hole Command) and pattern In this video, we have discussed how to use hole command (Hole wizard) […]
Creo Sketch based features and Shape Based Features
In the previous Tutorial Guide, we have discussed, Creo Basic Part modelling- Extrude, Revolve, Sweep, Helical Sweep, Swept blend, Datum Planes. In this tutorial Guide, we are going to discuss the Sketch based features and Shape Based Features with a video Tutorial. Creo Sketch based features and Shape Based Features Hole wizard Radius, & Auto Radius, […]
What are the sources of errors in measurement?
Yes, it is not possible to measure the true value of an object, there will be definitely an existence of error either it can be very small (Negligible) or considerable based on application. This error can be evaluated as either an absolute error or a relative error. let’s discuss different sources of errors in measurement. This is a […]
Design of Key for shaft in Machine Design
In the Previous article, we have discussed different types of keys for shafts, Now we are going to discuss what are the different types of forces acting on Key, and the design of Key for the shaft. Different forces acting on the Keys First of all, we have to know what are the different types of […]
Creo Basic Part modelling- Extrude, Revolve, Sweep, Helical Sweep, Swept blend, Datum Planes
In the previous Tutorial Guide, we have discussed, Creo User Interface. In this tutorial Guide, we are going to discuss The introduction to Creo Basic Part modelling with a video Tutorial. Creo Basic Part Modelling Notes: In this video, we have discussed the following tools. shape-based features (Extrude, Revolve, Sweep, Helical sweep, Swept blend) Model tree items, […]
Creo Sketching Module tutorial – Geometry tools, Datums, Constraining, annotating.
In the previous Tutorial Guide, we have discussed, The introduction to Creo Basic Part modelling. In this tutorial Guide, we are going to discuss The complete Creo sketching module with a video Tutorial. Creo Sketching Module tutorial Geometry creating tools, & editing tools Datums creations Annotations Constraints Sketching Setup Watch This Video On youtube: https://www.youtube.com/watch?v=AfdNzZhgUow <<Previous Video —– Next Video […]
What are the different types of Keys in machine design?
In mechanical engineering, Key is a part of a machine or equipment where it is used to connect the rotating machine element to the shaft and enables the torque transmission. In this article, we are going to discuss what are the different types of Keys in machine design. What is a Key? As we said above […]
What is Notch Sensitivity?
What exactly the notch sensitivity means? From our previous article, we have discussed how a fillet or a notch or a hole can reduce the stress concentration. But in this case, it will look somewhat different. actually, due to the presence of the notch or a hole in the body, the body tends to have […]