As we have discussed the different fuel injection system major components and the different types of the fuel injection system in the previous articles. Now in this article, we are going to explain how a fuel injection system work? Fuel injection system working principle Following is a typical fuel injection system schematic diagram for our […]
Archives for May 2019
Battery Ignition System vs Magneto Ignition System
We have discussed the Battery Ignition System and Magneto Ignition System in the previous articles but in this article, we are going to compare both of these Ignition systems together. Battery Ignition System Magneto Ignition System Battery is necessary The Battery is not necessary Difficult to start the engine if the battery completely discharged. No […]
Magneto Ignition System in Engines
As we have already discussed the Battery ignition system. This Magneto Ignition system is also having the same working principle but except the way how the high voltage is produced is different in this type of the Ignition system. Let’s discuss it in more detail. Magneto ignitions system is a special type of ignition system. […]
Battery Ignition System in engines
In the current trend, most of the moderns SI engines run with the Battery Ignition system. In this system, the energy for producing the spark is obtained from a 6 volt or a 12-volt battery. The Ignition system is said as the heart of the engine, and it is a part of the engine, not […]
Ignition System in SI Engine
In Spark Ignition Engine the self-ignition temperature of the fuel (Petrol) is very high and the compression ratio is lower, so we must have to have an Ignition system for the SI engines. There are different Ignition Systems available. In this article, we are going to discuss the functional requirements of the Ignition system and […]
Electronic Fuel Injection System
In the previous articles, we have discussed the functional requirements of the Fuel injection System, and the difference between the Fuel injector and the Carburetor. In this article, we are going to discuss the Electronic Fuel Injection System. Electronic Fuel Injection System As we have discussed the Petrol injection system, in the modern engines, In […]
SHELL AND TUBE HEAT EXCHANGER
1.INTRODUCTION 1.1 HEAT EXCHANGERS The heat exchanger is equipment which transfers energy from a hot fluid to cold Fluid. While the fluid is passing through the heat exchanger, the temperature of Fluid changes along the length of the heat exchanger. The present study focuses mainly on the design of heat exchanger known to be shell […]
Fuel Injection in SI Engine [Fuel Injection System in Petrol Engine]
Fuel Injection systems are generally used in the Compression Ignition Engine. In Spark Ignition engine, the fuel and air supposed to mixed in the Carburetor and enters into the combustion chamber rather than the injection of fuel directly into the cylinder. But in recent times the Gasoline injection system in a Spark ignition engine has […]