When an AC voltage is applied to a tube light fixture, The Voltage passes Through The Choke, The starter, and the filament of the tube. The filament light up and instantly warm up the tube the starter is made up of a discharge bulb with two electrodes next to it when electricity passes through it […]
Welcome to Projects Library
Cheap and Best Electronic Fan Regulator
One new circuit for is invented by Mohamedthambi, student of MKU University for Electronic Fan Regulator which is cheap and best. In the current available fan regulator, the barroter is used to the voltages at various level. But in our product is the PCB is used to drop the voltages at various level. 1.fig B […]
SHELL AND TUBE HEAT EXCHANGER
1.INTRODUCTION 1.1 HEAT EXCHANGERS The heat exchanger is equipment which transfers energy from a hot fluid to cold Fluid. While the fluid is passing through the heat exchanger, the temperature of Fluid changes along the length of the heat exchanger. The present study focuses mainly on the design of heat exchanger known to be shell […]
DESIGN AND FABRICATION OF BOREWELL RESCUE SYSTEM
ABSTRACT In recent years, there has been an increase in the bore well mishaps wherein children fall into open bore wells. This project aims at designing a system which is capable of rescuing the child with ease and without causing any discomforts such as scratching to the walls of the well. The system is a […]
Study Of Performance Test On Computerized MPFI Petrol Engine Test Rig
ABSTRACT IC Engines are tested to obtain information about the engine which cannot be determined by calculations, to confirm data used in the design, the validity of which is in doubt. The majority of the tests on internal combustion engines are carried out for commercial purposes in order to calculate and estimate their performance characteristics […]
Fabrication of Multipurpose Agriculture Cutter [Multi Agri Cutter]
![Fabrication of Multipurpose Agriculture Cutter [Multi Agri Cutter]](https://cdn-0.extrudesign.com/wp-content/uploads/2019/04/Multi-Agri-Cutter-Extrudesign.com-001_Feature-Image-300x155.jpg)
ABSTRACT The aim of the project is to” Fabricating Of Multipurpose Agriculture Cutter” Indian agriculture has a lot of dependency on farm labour for many kinds of operation. The main products of the farm are needed to be harvested. Nowadays the cutting of weeds, grass, trees, tree branches, paddy is done by snips. Thus taking […]
Impact of interpersonal conflict on university students’ mindset
A Final Year project on “Interpersonal conflict depends on us, but it is entirely our responsibility and the decision to better our relations among ourselves and others” is submitted by Usama Zeid Bashir Salim (from the European University of Lefke) to Extrudesign.com ABSTRACT In this research, the impact of interpersonal conflict on the higher institution […]
Computer Aided Design and Analysis of the Walking Mechanism
ABSTRACT On this Earth’s landmass there existing wheeled and tracked vehicles. But people and animals using their legs can go almost anywhere. The main aim of the walking mechanism is to develop rough terrain robots by capturing mobility autonomy and simulation of living creatures. Such robots can travel like living creatures in stepped stairways household […]
An Article on “Future Robots” by Boston Dynamics
This Article on “Future Robots” by Boston Dynamics is Written by me (Sundar Dannana), during my academics (IIIrd B.Tech-2015) out of interest in robotics, I am graduated from VITAM College of Engineering, Vishakapatnam. All the material source is taken from www.bostondynamics.com any mistake or misleading of information in this article is not our intention. Please […]
