As you know, there are 3 different types of cotter joints. The Gib and Cotter Joint is one of them. The other two are the Socket and Spigot Cotter Joint, and Sleeve and cotter joint. In this article, we are going to discuss how to design the Gib and Cotter joint for Square rods to avoid possible failures […]
Archives for December 2021
What are the Different Types of Cotter Joint?
A Cotter joint is a joint which is locked by a cotter. A cotter is a flat wedge-shaped piece of rectangular cross-section and its width is tapered from one end to another for an easy adjustment. Mostly it is tapered on one side but sometimes it may be tapered on both sides. Let us see […]
How to design a Gib and Cotter Joint for Connecting Rod end?
As you know, there are 3 different types of cotter joints. The Gib and Cotter Joint is one of them. The other two are the Socket and Spigot Cotter Joint, and Sleeve and cotter joint. In this article, we are going to discuss this Gib and Cotter Joint construction and how to design it for the Connecting […]
How to Design a Sleeve and Cotter Joint?
As you know, there are 3 different types of cotter joints. The Sleeve and Cotter Joint is one of them. The other two are the Socket and Spigot Cotter Joint, and Gib and cotter joint. In this article, we are going to discuss this Sleeve and Cotter joint construction and how to design this Cotter Joint […]
How to design Socket and Spigot Cotter Joint?
As you know, there are 3 different types of cotter joints. The first one is the Socket and Spigot cotter joint. The other two are the Sleeve and cotter joint, and Gib and cotter joint. In this article, we are going to discuss this first type of cotter joint construction and how to design this Socket […]
Designing of Microstrip Antenna for Wireless Application
Project Title: Designing of Microstrip Antenna for Wireless application by integrating Embedded and IoT A Final year project on “Designing of Microstrip Antenna for Wireless application by integrating Embedded and IoT” was submitted by Bhavendra chowdary Swarna (from Lovely Professional University, India)to extrudesign.com. ABSTRACT The project is about designing a microstrip antenna using different modes of feeding […]
How to Calculate Eye Bolt Diameter to Lift Load?
A lifting eye bolt, as shown in the below picture, is used for lifting and transporting heavy machines. It consists of a ring of the circular cross-section at the head and is provided with threads at the lower portion for screwing inside a threaded hole on the top of the machine. But how to choose […]
How to Calculate Stress in Bolts?
We have discussed the different types of screw fasteners in the previous article, In every screwed joint these screwed fasteners will be tightened with torque or load which they can withstand. In order to know how much load we can apply, we must understand how much amount of stress it can bear in the screwed […]
How to Read Screw Thread Designation?
Have you ever wondered how to read the screw thread designation in engineering drawings? Sometimes it’s quite confusing to read the Hole thread designation on the drawings. Let us discuss How to read Screw Thread Designation from the hole or shaft screw thread callout on the engineering drawings. Designation meaning: The act of indicating or […]
Designing an Automated Production Line for Recycling Plant
Project Title: Designing an Automated Production Line for a Manual Operating Recycling Plant A Final year project on “Designing an Automated Production Line for Manual Operating Recycling Plant” was submitted by Abdelmalek Bouchema (from University of Sunderland United Kingdome )to extrudesign.com. Abstract Waste bread has been a growing issue in the Kingdom of Jordan, and this influenced the birth […]
Blockchain Technology And its Applications in Service Sector
Project Title: A Study On Blockchain Technology And Its Applications In Selected Areas Of Service Sector A Final year project on “A Study On Blockchain Technology And Its Applications In Selected Areas Of Service Sector” was submitted by Athira Venugopal (from PSG Institute of Management and Technology Coimbatore, Tamil Nadu, Anna University )to extrudesign.com. 1. ABSTRACT While blockchain technology is commonly considered potentially disruptive in various regards, there is a lack of understanding where and how […]