Repeat Regions feature in creo is used to create BOM report. While adding the parameters to the BOM columns It is necessary to know the details of the Report symbols listed in the Repeat Region Feature. So the list of parameters shown in the repeat region creo is detailed below.
Repeat Region Creo parameters/ Report Symbols
| &asm.mbr.comp…. | Retrieves information about the component from the model data and displays it in the report table. |
| &asm.mbr.cparam…. | Retrieves a given component parameter. |
| &asm.mbr.cparams…. | Lists information pertaining to all component parameters for the current model. |
| &asm.mbr.name | Displays the name of an assembly member. To show tie wraps and markers, the region attributes must be set to Cable Info. |
| &asm.mbr.param…. | Displays information about parameters in an assembly member. |
| &asm.mbr.type | Displays the type (part or assembly) of an assembly member. |
| &asm.mbr.User Defined | Lists the specified user-defined parameter for the respective assembly components. Note that “&asm.mbr.” can be used as a prefix before any user-defined parameter in an assembly member. |
| &asm.mbr.cblprm…. | Lists values for given cabling parameters. |
| &asm.mbr.cblprms…. | Lists values for cabling and wire parameters. |
| &asm.mbr.connprm…. | Lists parameters for connector pins in flat harness assemblies. |
| &asm.mbr.location… | Lists the location callouts in a specified view or all views of the drawing in session. |
| &asm.mbr.pipe…. | Shows pipeline, pipe segment, and Pro/REPORT bend information parameters. |
| &asm.mbr.generic.name…. | Lists the generic name information for a Family Table instance in a table. |
| &asm.mbr.topgeneric.name…. | Lists the top generic name information for a Family Table instance in a table when working with a nested Family Table. |
Few other Repeat Region Creo parameters
| &fam…. | Retrieves Family Table information about the model. |
| &harn…. | Shows cable harness parameters for 3-D harness parts and flat harness assemblies. |
| &lay…. | Retrieves layout information about the model. |
| &mbr…. | Retrieves parameters about a single component. |
| &mdl…. | Retrieves information about a single model. |
| &prs…. | Retrieves process-specific report parameters used to create reports on the entire process sequence. |
| &rpt…. | Displays information about each record in a repeat region. |
| &rpt.index | Displays the number assigned to each record in a repeat region. |
| &rpt.level | Shows the recursive depth of an item in a repeat region. |
| &rpt.qty | Displays the quantity of an item in a repeat region. |
| &weldasm…. | Retrieves welding information about the model. |
Content credits: Creo help Center [http://support.ptc.com/help/creo/]
Leave a Reply