Prediction of the failure of the machine component in the case of the uniaxial stresses(Simple tension or compression) is very simple by understanding the Stress-strain curve. Predicting the failure of any machine component is complicated when the machine component is subjected to the different types of Bi-axial stresses(Component subjected to two different stresses) or Tri-axial […]
In Mechanical Engineering, Machine Design is subjected to creating new or Advanced machines. This involves improving the existing machines to better machines.
The design process is a time-consuming process which includes implementing an Idea and considering the commercial and economic aspects, Making the idea into a shape in the form of drawings by keeping the available resources in mind to make the actual Idea into a life.
This is the art of Mechanical engineering.
The Idea Thake shape and eventually come to life
From all the way, we have discussed the different types of stress and strains, Now its time to understand what are the principal stresses. The maximum stress induced in a plane is called the principal stress and the plane at which the maximum stress induced referred to the principal plane where the shear stress is […]
In the previous article, we have discussed what are the different manufacturing processes. The manufacturing process turns the raw material into finished products. There are different manufacturing process which uses different technologies and machinery to get the final products from the raw material. In this article, we discussed the different casting processes. Casting Processes Casting […]
Crane Hook Design Problem: The crane hook carries a load of 20 kN as shown in given below Fig. The section at X-X is rectangular whose horizontal side is 100 mm. Find the stresses in the inner and outer fibres, the given section. Solution: Given data (All are in Metric Units) Load (W) = 20kN […]
When we say common Cross-section properties, what we will think of? First of all Sectional area, Section modulus, the moment of inertia, and few other. The different cross-section properties for the different cross-sections such as circular, square, rectangular and trapezoidal and triangular are discussed briefly in this article. First of all, we have to understand […]